Cooler Building. Lower Bills. Greener Rating.
The west facade cooks the building from mid-morning, the chillers run flat out to keep up, and the green rating needs points the design is short on. New Way shades the building at the glass, so the heat is stopped before it gets in, the cooling load drops, and the daylight, comfort, and low-emitting-material credits stack up toward the rating. Here is how to shade a whole building for the energy and for the rating, indoors and out.
Trusted, Loved And Installed By
Sustainability That Starts at the Glass.
Whether it is a new green-rated tower or an existing building cutting its energy, one team makes, fits, and backs the shading that lowers the cooling load and helps the building earn its rating, inside and out.
Stop the heat before it gets in
Renson Fixscreen exterior screens reject the sun's heat at the facade, before it passes through the glass, so the cooling load drops at the source. The greenest cooling is the heat you keep out.

Stop the heat before it gets in
Renson Fixscreen exterior screens reject the sun's heat at the facade, before it passes through the glass, so the cooling load drops at the source. The greenest cooling is the heat you keep out.
Daylight without the glare or the heat
Sunscreen fabric lets the daylight in while cutting the glare and most of the heat, so the building can lean on daylight instead of running every light all day.

Daylight without the glare or the heat
Sunscreen fabric lets the daylight in while cutting the glare and most of the heat, so the building can lean on daylight instead of running every light all day.
Materials that count toward the rating
PVC-free Trevira CS fabric, GREENGUARD Gold and OEKO-TEX certified, low-emitting and healthy, the kind of low-VOC material a green rating and a WELL standard look for.

Materials that count toward the rating
PVC-free Trevira CS fabric, GREENGUARD Gold and OEKO-TEX certified, low-emitting and healthy, the kind of low-VOC material a green rating and a WELL standard look for.
Automated, so the saving is consistent
On Lutron control with daylight tracking, the shades respond to the sun through the day, so the energy benefit is captured every day, not only when someone remembers to lower them.

Automated, so the saving is consistent
On Lutron control with daylight tracking, the shades respond to the sun through the day, so the energy benefit is captured every day, not only when someone remembers to lower them.
Key Benefits
Exterior shading stops solar heat at the glass, so the chillers do less.
Sunscreen brings the daylight in and keeps the glare and heat out.
PVC-free, low-emitting, certified fabric for the green and WELL criteria.
Automated shades capture the benefit every day, not by chance.
Studio Forma Won a Landmark Project with New Way 
exclusive fabrics
Explore Our Exclusive Fabric Collections
How It Works
A simple three-step process designed to guide you from inspiration 
to installation, with expert support at every stage.
How to Make Your Building Greener With New Way
Three steps from a facade that cooks to a cooler building and a greener rating.
1. Walk the building with us.
The facades, the orientations, the glazing, and the rating you are targeting. We map where the heat and the glare come in, and where shading earns the most, for the energy and for the rating.
2. We measure, make, and fit it.
Exterior screens on the hot facades, sunscreen and daylight control inside, in PVC-free certified fabric, fabricated in our own Puncak Alam facility.
3. We install and back it.
Phased around a working building, with the spec sheets and certificates ready for the rating submission, then supported by a named local team and warranty.
Frequently Asked Questions
Will the privacy curtains actually close fully and stay hygienic between patients?
Yes, and that is the point of doing it properly. As of 2026, New Way fits antimicrobial hospital curtains that are 99.9 percent bacterial-reduction tested to ISO 20743 against MRSA, E. coli, and S. aureus, and durable through 50-plus wash cycles, on a 6063-T5 aluminum cubicle track that draws fully around the bay rather than stopping short. The hookless header then cuts the curtain change from 10 to 20 minutes to 1 to 2, with no ladder, so the change cycle your infection team sets is one the staff can actually keep. The hygiene holds because both the fabric and the routine are looked after, not just the fabric.
Can patient rooms get dark and quiet enough for someone to actually rest?
Yes. As of 2026, New Way fabricates Lutron motorized shades for patient rooms and VIP wards, including Triathlon, Serena, Sivoia QS, and Palladiom, paired with blackout fabric and side channels so a room goes properly dark in the daytime. The quietest Lutron motors run around 35 dBA, so a shade closing on a schedule does not wake a sleeping patient. Rooms can be set to lower the shades at rest time and lift them gently later, or left on a simple switch by the bed. Rest is part of recovery, and a dark, quiet room is one of the easiest parts of it to get right.
Does the shading meet the standards a clinical building needs?
Yes. As of 2026, the cubicle system is built to BS 6095 for the track, BS 5867 Part 2 Type C for curtain flammability, ISO 20743 for antimicrobial performance, and ISO 9001 for manufacturing, with M1 and NFPA 701 fire classifications also met. The window fabric is M1 fire-rated (NF P92-503), PVC-free Trevira CS, GREENGUARD Gold and OEKO-TEX certified, and the shades are cordless or motorized for safety in patient areas. The track is engineered for a 10 to 20 year service life, not a 2-year finish. Send the building’s specification and the team confirms which products meet it before anything is ordered.
Can you handle a whole facility, and install around occupied wards?
Yes. As of 2026, New Way installs with its own team and phases the work around occupied wards and low-traffic windows, so clinical areas keep running. Because the cubicle track, the curtains, and the shades are measured and fabricated in our own Puncak Alam facility before installation day, the on-site time per bay or room is short. We agree the sequence and the access times with your facilities and M&E team up front, and a phased rollout suits a hospital that cannot close a ward. After installation, you have a named local contact and warranty support, so a later adjustment is a quick call.
Can the motorized shading go in without upsetting hospital IT or medical equipment?
Yes, and this is usually the first question the IT department asks. As of 2026, New Way’s motorized hospital line runs on enterprise-grade Lutron control on a dedicated Clear Connect frequency band with VLAN segmentation, so it does not interfere with medical equipment and does not widen the network attack surface. Aqara is used only where the hospital IT policy explicitly permits consumer-grade Zigbee on a dedicated VLAN. We engage the IT department directly during the spec review and provide the frequency and VLAN documentation, so the signoff happens before the order, not after.
Can you do the wards, the patient rooms, and the atrium, indoors and out, from one supplier?
Yes. As of 2026, New Way shades a whole healthcare facility from one fabricator: cubicle curtain track and antimicrobial curtains in the wards, blackout and quiet Lutron shading in the patient rooms and VIP wards, Premium Hotel Ripple drapery in receptions, chapels, and boardrooms, and Renson Fixscreen exterior shading on the atrium edges, rooftop terraces, and hot facades. As the authorized fabricator for Lutron, Renson, and Aqara, New Way carries the indoor and outdoor scope together, so the finishes are coordinated, the compliance is handled once, and one team is accountable across the building rather than separate suppliers for the wards, the rooms, and the facade.
Ready to grow your business with premium 
roller blinds trusted by Lutron, Aqara & Renson?
Join our dealer network and offer world-class shading solutions backed by authorized fabricators and global support
Request a Sales Call
We’ll arrange your call and confirm next steps within 1 business day.
Chat via WhatsApp
Chat with our dealer team
for pricing and availability.
Contact Us Directly
We reply within 24 hours
Support Hours: Mon–Fri 9:00–18:00, Sat 10:00–14:00 (MYT)