Yes, that is exactly what sunscreen fabric is for. As of 2026, New Way fits sunscreen roller shades in an openness factor matched to each facade, usually around 1 to 5 percent, which blocks the direct glare and most of the heat while keeping the outside view and the daylight. Staff stop angling their monitors away from the window, and the floor does not go dark or cave-like. For rooms that need full darkness, such as a media or training room, we pair a blackout shade on the same window. We confirm the right openness for each side of the building during the site visit.

Yes, and the biggest gain comes from shading the outside of the glass, not the inside. As of 2026, New Way fits exterior shading, such as Renson Fixscreen, on the hot facade, which rejects the sun’s heat before it passes through the glass; interior shading only absorbs the heat after it is already in the room. Sunscreen fabric on the inside helps with glare and some heat, but stopping solar gain at the facade is what takes load off the air-conditioning. We do not promise a fixed percentage, because it depends on your glazing, orientation, and hours, but reducing solar heat gain is the proven path to a lower cooling load.

Yes. As of 2026, New Way fabricates Lutron motorized shades, including Triathlon, Serena, and Sivoia QS, that drop on a wall keypad or a schedule and lift again after, with no cords to pull mid-meeting. As an authorized Lutron fabricator, New Way builds the shades to integrate with the room’s control, so a single button can dim the lights and lower the shades for a presentation, then reset the room. For a boardroom that needs full blackout, we pair the right fabric with side channels. Tell us how the rooms are used and we set the scenes during commissioning.

Yes. As of 2026, New Way’s commercial fabric range carries an M1 fire rating (NF P92-503) and includes PVC-free Trevira CS for green-building and material-health requirements, alongside GREENGUARD Gold, OEKO-TEX Standard 100, and REACH certification. The fabric is woven up to 3.2 meters wide for full-height office glazing without a seam, and fiberglass sunscreen handles tall drops. Color holds at Grade 8 fastness, the highest rating, so a west-facing floor does not fade unevenly. Send your fit-out’s fire and material specifications and the team will confirm which fabric meets them before anything is ordered.

Yes. As of 2026, New Way installs with its own team and plans the work around a live office, usually floor by floor or after hours where access needs it, so the working floor is not shut down. Because the shades are measured and fabricated in our own Puncak Alam facility before installation day, the on-site time per window is short. We agree the sequence and the access windows with your facilities team up front. After installation, you have a named local contact and warranty support, not an overseas seller, so a later adjustment is a quick call rather than a project.

Yes, and doing both together is usually the better result. As of 2026, New Way handles interior shading and exterior facade shading as one scope: sunscreen and motorized roller shades inside, and Renson Fixscreen, a sealed and wind-rated exterior screen, on the hot facade or the terrace. As the authorized fabricator for Lutron, Renson, and Aqara, New Way carries the whole envelope, so the inside and outside finishes are coordinated, the control is planned once, and one team is accountable rather than two suppliers blaming each other. Bring the floor plan and the facade orientation to the consultation and we scope both in one visit.